DAPAudio EDGE EUA-1, User Manual

11 

EDGE EUA-1 

Product code: D1486 

6.

Troubleshooting 

This troubleshooting guide contains solutions to problems which can be carried out by an ordinary 
person. The device does not contain user-serviceable parts. 

Unauthorized modifications to the device will render the warranty void. Such modifications may result in 
injuries and material damage. 

Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the 
solution is not described in the table. 

Problem 

Probable cause(s) 

Solution 

The device does not 
function at all 

No power to the device 

●

Make sure that the device is 
connected to the antenna distributor 
or to the receiver 

Bursts of noise or other 
audible signals 
present 

Sources of interference are present 

●

Identify potential sources of 
interference (other RF-sources) and turn 
them off 

●

Set the gain boost switch (03) to 0 dB 

●

Move the device to another place until 
the sound quality is good 

7.

Maintenance 

Preventive Maintenance 

Attention 
Before use, examine the device visually for any defects. 

Basic Cleaning Instructions 

To clean the device, follow the steps below: 

Disconnect the device from the antenna distributor/ receiver. 

Clean the device with a soft, lint-free cloth. 

Attention 

●

Do not immerse the device in liquid. 

●

Do not use alcohol or solvents. 

Corrective Maintenance 

The device does not contain user-serviceable parts. Do not open the device and do not modify the 
device. 

Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for 
more information.