background image

 

  

 

 

12 

   

 

GIG-124C 

Order code: D2284  

Modules 

 
Option One - SMP-S 

(Order code: D2290)

 

 
The file system should be FAT16 or FAT32. This player can only decode MP3.  
It has 7 rank subordinate folders at most. 
 

 

USB port: Allows the connection of any USB memory stick. 

 

 

PRE: Use this button to go back to the beginning of the current track or select a previous 
track for playing. 

 

 

NEXT: Use this button to skip to the next track. 

 

PLAY / PAUSE:  Use this button to start playback. Press once to start playback, twice to set 
the pause mode and again to resume playback. 

 

 

STOP: Press this button to stop playback. 

 

 

DISPLAY: All the USB player information is monitored  

 

 

through this display. 

 

 

 

 
 
 
Operation Instruction for Song Module 

 

When no USB memory stick is inserted, the display will show Fig. 01 (see next page) 

 

Insert a USB memory stick, the USB player starts searching and the display shows "Searching". At 
the end of the search, the display will show the menu as shown in Fig. 02 (see next page). 
 Using        PRE /        NEXT keys, you can select one of following three menu options ("Playing", 
"Program" and "Folder List"). Press Playing, the unit will enter into the corresponding operation 
mode. 

 

C  

"Playing" mode - single song play 
1).  

In Fig. 02 (see next page), select “Playing” mode. This display shows the names of all the 
folders containing MP3 files. Using the        PRE /       NEXT keys, you can scan the folders, 
then press        PLAY / PAUSE. It will open the corresponding folder. Press      STOP to return 
to Fig. 02 (see next page). 

 
2).  

After opening the folder, the display will show Fig. 03 (see next page). This display shows 
the MP3 file list. You can scroll the list using the keys        PRE /        NEXT. Choose the desired 
song. Press the        PLAY / PAUSE key, the selected song playback will start. In order to stop 
playback, you just need to press the      STOP key. Then, if you press the        PLAY / PAUSE 
key, the song playback will start from the pause point, if you press again the      STOP key, 
the system will return to Fig. 03 (see next page). 

 
 

 

Summary of Contents for GIG-124C

























Reviews: