DAPAudio GIG-124C, Manual

6 

GIG-124C 

Order code: D2284  

Installation 

Introduction 

 
This is a professional compact mixer that gives you great quality and better reliability than ever before. 
You will get the smooth, accurate more natural and open sound from this apparatus. It is really ideal for 
gigs, recording and fixed PA installations. 
 
The GIG-124C Mixing Console is packed with features that cannot be found in other consoles of its size: 4 
mono (provided with ultra-low noise microphone pre-amplifiers and Phantom Power at +48 Volt ) and 4 
stereo input channels, each of them provided with a 3-band equalizer for HI, MID and LOW control, as 
well as 2 auxiliary controls, highly accurate 12-segment bar graph meter and 2-track inputs assignable to 
main mix, control room/phones Outputs etc. 
 
This unit is very easy to operate, but we advise you to go through each section of this manual carefully. 
 

Ready to start 

 
1)

Please check the AC voltage available in your country before connecting your mixer to the 

AC socket. 

2)

Be sure that the main power switch is turned off before connecting the mixer to the AC 

socket. You should also make sure that all input and output controls are turned down. This 

will avoid damage to your speakers and avoid excessive noise. 

3)

Always turn on the mixer before you turn on the power amplifier; turn off the mixer after the power 
amplifier is turned off. 

4)  Before connecting and disconnecting the unit from the power source, always turn off the unit. 
5)  Cleaning: 

Disconnect the mains power supply and then wipe the mixer with a damp cloth. Do not 

immerse in liquid. Do not use alcohol or solvents.