background image

 

  

 

 

   

 

GIG-164CFX 

Order code: D2287  

Warning 

 

 

 

Unpacking Instructions 

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure 
that all parts are present and have been received in good condition. Notify the dealer immediately and 
retain packing material for inspection if any parts appear damaged from shipping or the carton itself 
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be 
returned to the factory, it is important that the fixture be returned in the original factory box and packing. 
 
Your shipment includes: 

 

 

GIG-164CFX mixing console 

 

3-pin IEC power cable 1,5m 

 

User manual 

 

 

 

 

Safety Instructions

 

Every person involved with the installation, operation and maintenance of this system has to: 
• 

be qualified 

• 

follow the instructions of this manual 

 

 

 
Before you initial start-up, please make sure that there is no damage caused by transportation. Should 
there be any, consult your dealer and do not use the system.  
 
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to 
follow the safety instructions and warning notes written in this manual.  
 
Please consider that damages caused by manual modifications to the system are not subject to 
warranty.  
 
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.  
 

 

Summary of Contents for GIG-164CFX

























Reviews: