46
Ordercode: D2289
GIG-202 Tab
GEQ interface
In order to access this page, press the GEQ button (42) on the panel or on the “System” page.
The GIG-202 Tab mixer has several graphic equalizers: 31 bands 1/3 octave, frequency response 20 Hz -
20 kHz and 24 bit/48 kHz sample rate. This feature is available for: MAIN outputs with stereo equalizer, SUB
1-4 (AUX 5-8) mono and AUX 1-4 mono.
Frequency setting: Press the left/right cursors on the panel, or the arrows
which appear on the display, to browse through the 31 bands. As you
change frequency, the cursor will light up, indicating the position on the
equalizer. You can monitor the selected frequency in the box that appears
in the lower left corner.
Gain adjustment: Once you have selected the desired frequency, set gain
by pressing the up/down cursors on the panel or the arrows which appear
on the screen. It is also possible to use the Encoder (36). The gain value can
be monitored in the gain box in the lower left corner.
Here, you can see the name of the loaded preset.
The “ON” icon has the same function as the Bypass button. With this
function, it is possible to electronically set the equalizer to flat position,
without losing the previously made adjustments. You can use this function to
quickly compare the sound with and without the equalizer and
subsequently switch it ON or OFF, according to your wish.
This icon is synchronized with the Flat button (37) on the panel. When this
function is enabled, the equalizer will return to the factory settings. This
function requires confirmation.
Summary of Contents for GIG-202 Tab
Page 62: ...61 Ordercode D2289 GIG 202 Tab Block Diagram...
Page 64: ...2016 DAP Audio...
