48
Ordercode: D2289
GIG-202 Tab
Delay
This Delay provides the control of the delay (echo) time.
The delayed signal is fed back into the Delay line by the
Decay rotary, thus creating Delay repeats.
Tap the [TAP]Enter
(38) button, or touch the Time
wheel and turn the Encoder (36) to change
the basic Delay time. The maximum tap time is
1200ms.
Change the value of the Decay rotary to change the
amount of signal fed back into the Delay line. A 99%
setting will loop the Delay line.
The HiDamp rotary adjusts the decay of high
frequencies within the reverb tail. Efx Out controls the
proportion of the processed (Efx) signal sent to the
outputs. Dry Out controls the proportion of the
unprocessed (dry) signal sent to the outputs.
St Delay
Stereo Delay provides control of left and right delay
(echo) times. When the delay time is tapped, the ratio
between the left and right signal is 1:2. Use the Stereo
Delay to give your mono signals a wide presence in the
stereo field.
Tap the [TAP]Enter
(38) button, or touch the L
Time/R Time wheel and turn the Encoder (36) to
change
the basic Delay time. The maximum tap time is
1200ms.
Change the value of the L Decay / R Decay rotary to
change the amount of signal fed back into the Delay
line. A 99% setting will loop the Delay line.
The HiDamp rotary adjusts the decay of high
frequencies within the reverb tail.
Efx Out controls the proportion of the processed (Efx)
signal sent to the outputs. Dry Out controls the
proportion of the unprocessed (dry) signal sent to the
outputs.
Summary of Contents for GIG-202 Tab
Page 62: ...61 Ordercode D2289 GIG 202 Tab Block Diagram...
Page 64: ...2016 DAP Audio...
