50
Ordercode: D2289
GIG-202 Tab
Delay Rev
Here we have combined Delay and Room reverb, so
that a single device can provide a variety of delay
settings, plus add just the right type and amount of
reverb to the selected signal.
The PreDelay rotary controls the amount of time before
the reverberation is heard following the source signal.
RevDecay controls the amount of time it takes for the
reverb to dissipate. RoomSize controls the perceived
size of the space being created by the reverb effect.
The Rev.Hi rotary adjusts the decay of high frequencies
within the reverb tail. Rev Out controls the proportion of
the processed (reverb) signal sent to the outputs.
Tap the [TAP]Enter
(38) button, or touch the
EchoTime wheel and turn the Encoder (36) to change
the basic Delay time. The maximum tap time is
1200ms. Change the value of the Echo F.B. to change
the amount of signal fed back into the Delay line. A
99% setting will loop the Delay line. The Echo Hi rotary
adjusts the decay of high frequencies within the delay
tail. Echo Out controls the proportion of the processed
(reverb) signal sent to the outputs. Dry Out controls the
proportion of the unprocessed (dry) signal sent to the
outputs.
StDelay Rev
Here we have combined Stereo Delay and Room
reverb, so that a single device can provide a variety of
delay settings, plus add just the right type and amount
of reverb to the selected signal.
The PreDelay rotary controls the amount of time before
the reverberation is heard following the source signal.
RevDecay controls the amount of time it takes for the
reverb to dissipate. RoomSize controls the perceived
size of the space being created by the reverb effect.
The Rev.Hi rotary adjusts the decay of high frequencies
within the reverb tail. Rev Out controls the proportion of
the processed (reverb) signal sent to the outputs.
Tap the [TAP]Enter
(38) button, or touch the L
Time or R Time wheel and turn the Encoder (36) to
change the basic Delay time. The maximum tap time is
1200ms. L Decay and R Decay control the amount of
time it takes for the reverb to dissipate. The Echo Hi
rotary adjusts the decay of high frequencies within the
delay tail. Echo Out controls the proportion of the
processed (reverb) signal sent to the outputs. Dry Out
controls the proportion of the unprocessed (dry) signal
sent to the outputs.
Summary of Contents for GIG-202 Tab
Page 62: ...61 Ordercode D2289 GIG 202 Tab Block Diagram...
Page 64: ...2016 DAP Audio...
