6
Maintenance
The K-115 requires almost no maintenance. However, you should keep the unit clean. Disconnect the
mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
Dap Audio K-115
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
1.
If the device does not operate properly, unplug the device.
2.
Check the power from the wall, all cables etc.
3.
If all of the above appears to be O.K., plug the unit in again.
4.
If you are unable to determine the cause of the problem, do not open the device, as this may
damage the unit and the warranty will become void.
5.
Return the device to your Dap Audio dealer.
Product Specifications
Model: DAP Audio K-115
15/1 passive plastic vented PA speaker system
Woofer:
15”, 8 Ohm
63 mm Voice Coil
High Driver:
1.375” Titanium Dome, 8 Ohm,
63 mm Voice Coil
Nominal Impedance:
8 Ohm
Power Handling:
225 Watt Continuous
450 Watt Program
900 Watt Peak
Freq. Response (-3 dB):
60Hz – 16.000 Hz
Freq. Range (-10 dB):
45Hz – 20.000 Hz
Sensitivity (Full Space):
96 dB / W / m
Peak SPL at 1 m (Theoretical): 125.5 dB
Nominal Dispersion (H x V):
65° x 65°
Dimensions(W x H x D):
450 x 690 x 350 mm
Net Weight:
19.68 kg
Spare parts
:
• SPLEE003
K115 Bass speaker 15 inch
• SPLEE005
K115 Crossover
• SPLEE010
K112/K115 High recone
• SPLEE0001 K112(A)/K115(A) High driver
Summary of Contents for K-115
Page 1: ...K 115 ORDERCODE D3552...
Page 9: ......
