10
Maintenance
The
Dap Audio Palladium Vintage Series
requires almost no maintenance. However, you should keep the
unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse
in liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth.
Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
DAP Audio Palladium Vintage Series
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates
properly, do not carry out following steps.
1.
If you experience low output or no output at all, unplug the amplifier immediately.
2.
Check power from the wall, all cables, the fuse, etc.
3.
If all of the above appears to be O.K., plug the unit in again.
4.
If nothing happens after 30 seconds, turn off the amplifier and unplug the device.
5.
Return the machine to your DAP Audio dealer.
Summary of Contents for Palladium P-400
Page 14: ...2003 DapAudio...
