background image

 

  

 

 

   

 

Ordercode: D3506 

PR-62 65W 

 

Do not open the device and do not modify the device. 

 

Do not set the input signal level higher than required to drive the equipment to full output. 

 

Only use system indoors, avoid contact with water or other liquids. 

 

Avoid flames and do not put close to flammable liquids or gases. 

 

Make sure you do not use the wrong kind of cables or defective cables. 

 

Extreme frequency boosts in connection with a high input signal level may lead to overdriving your 
equipment. Should this occur, it is necessary to reduce the input signal level. 

 

If system is dropped or struck, disconnect the power supply immediately. Have a qualified engineer 
inspect for safety before operating. 

 

If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not 
switch it on immediately. The arising condensation water might damage your system. Leave the 
system switched off until it has reached room temperature. 

 

If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely 
(preferably in the original packing material), and return it to your Dap Audio dealer for service. 

 

Repairs, servicing and electric connection must be carried out by a qualified technician. 

 

Keep this manual for future reference. 

 

Clean only with dry cloth. 

 

No main power shall be connected to the loudspeakers; doing so will damage the speaker. 

 

Take care of your speaker wires, they should be free of damage. Damaged speaker wires might 
result in poor sound quality and can damage amplifiers. 

 

This device should only be serviced by qualified personnel. If not warranty might be void. 

 

Use cable of the right gauge, certainly for long runs. 

 

Use cables with clear color indication and maintain polarity throughout the whole system. 

 

Avoid loud feedback from microphones, this can damage your speaker. 

 

Please check the unit’s condition after unpacking. If the outside of the carton box has been 
damaged, inform your shipper immediately. 

 

Operating Determinations 

If this system is operated in any other way, than the one described in this manual, the product may suffer 
damages and the warranty becomes void.  
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc. 
 

You endanger your own safety and the safety of others! 

 

Improper installation can cause serious injuries and damage of property ! 

 

 

 
The PR-62 can be mounted to any kind of truss with a clamp or placed on a flat stage floor. 
 

 

Summary of Contents for PR-62 65W













Reviews: