DAPAudio TL-500, Product Manual

11

Maintenance

The 

DAP Audio-CD-Player TL-500 

requires almost no maintenance. However, you should keep the unit

clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections with a
damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.

Troubleshooting

DAP Audio-CD-Player TL-500
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.

1.

 If the device does not operate properly, unplug the device.

2.

 Check power from the wall, all cables, connections, etc.

3.

 If all of the above appears to be O.K., plug the unit in again.

4.

 If nothing happens after 30 seconds, unplug the device.

5. 

Return the device to your DAP Audio dealer.