4
Description of the device
Features
The Vision 1600, 2400 and 3500 are professional high-end amplifiers :
Vision 1600
• 2x Channel in and Link out
• 2x Speakon out
• Built-in Clip Limiter
• Switch-able entrance sensitivity: 0.775V, 1V and 1.4V
• Bridge, parallel or stereo mode
• 30 Hz Hi-pass filter, -3 dB, 18 dB/oct.
• Ground-selector
• Back to front airflow
• Amplifier has softstart and separate standby power. In case of temporary power failure, the amplifier
has to be restarted by pushing the ON/OFF switch again. On and off switching eventually happens
with relay.
Vision 2400
• This amplifier is primarily secured on 15A
• 2x Channel in and Link out
• 2x Speakon out and 2x binding- post out
• Selectable Clip Limiter
• Selectable input sensitivity: 0.775V, 1V and 1.4V
• Bridge, parallel or stereo mode
• 30 Hz Hi-pass filter, -3 dB, 18 dB/oct.
• Ground-selector
• Selectable crossover, Low-pass, 150 Hz, 18 dB/oct.
• Back to front airflow
• Amplifier has softstart and separate standby power. In case of temporary power failure, the amplifier
has to be restarted by pushing the ON/OFF switch again. On and off switching eventually happens with
relay.
Vision 3500
• This amplifier is primarily secured on 18A
• 2x Channel in and Link out
• 2x Speakon out and 2x binding- post out
• Selectable Clip Limiter
• Selectable input sensitivity: 0.775V, 1V and 1.4V
• Bridge, parallel or stereo mode
• 30 Hz Hi-pass filter, -3 dB, 18 dB/oct.
• Ground-selector
• Selectable crossover, Low-pass, 150 Hz, 18 dB/oct.
• Back to front airflow
• Amplifier has softstart and separate standby power. In case of temporary power failure, the amplifier
has to be restarted by pushing the ON/OFF switch again. On and off switching eventually happens
with relay.
