NET-AIO12 User’s Manual
6
3-2 USB-B Connector (CN1)
As a B-type USB connector, it is connected to a PC for data transmission/reception.
3-3 LED(RUN) (J4)
Displays the operation status of the board. Lights up when data collection is in progress.
3-4 AIN Connector (J6)
The analog input signal accepts a single-ended input signal in the range of ±5/10V. For input
signal connection, connect signal to AIN_CH pin and ground to AGND.
3
8
7
6
2
5
4
1
9
12
11
10
J6
Terminal block, BR-5001C, 5mm-pitch
[Table2. AIN Connector Description]
Pin No.
Pin Name
Description
Remark
1
AGND
Analog Ground, GROUND
2
AIN_CH1
Analog Input Channel 1
3
AGND
Analog Ground, GROUND
4
AIN_CH2
Analog Input Channel 2
5
AGND
Analog Ground, GROUND
6
AIN_CH3
Analog Input Channel 3
7
AGND
Analog Ground, GROUND
8
AIN_CH4
Analog Input Channel 4
9
AGND
Analog Ground, GROUND
10
AIN_CH5
Analog Input Channel 5
11
AGND
Analog Ground, GROUND
12
AIN_CH6
Analog Input Channel 5
3-5 Ethernet Connector (J10)
Connect to an Ethernet hub or an Ethernet adapter. Automatically detects the type of
cross/direct cable.
