9
3. OPERATION
0
I
®
D14560
TM
WWW.DARAY.COM
0870 777 2664
Wall mount PSU module
Wall mount
Turn on the mains rocker switch on the power-supply module. The switch should illuminate.
If the switch does not illuminate, check the mains supply and then the fuses in the module,
which are located on its right-hand side. For the versions powered via an IEC lead with a
moulded mains plug, check the fuse in the mains plug.
Turn on the light using the switch on the head mounting. Set the required illumination level
using the variable intensity control on the power-supply module.
Ceiling mount
Switch on at the switch fused spur. The indicator on the switch fused spur should illuminate.
Turn on the light using the switch on the head mounting. Set the required illumination level
using the variable intensity control module.
If the Bilite does not illuminate, press the variable intensity control knob and then set the
desired intensity.
All models
After use, switch off the power-supply module on the wall, as well as the light-head switch.
Use the handles to steer the light-patch to where you want it; the suspension arm swivels at
the mounting and at the joint between the primary and jib arms. The jib arm allows the
light-head to be moved up and down. The light-head itself can rotate 360° on the jib arm in
its horizontal axis.
Mains rocker switch
Variable intensity
control
Summary of Contents for BILITE
