6
5. Components
6. Operation
1.
Connect the headlamp power cable to the battery pack.
2.
Switch the battery pack on; the 'ON' indicator should illuminate
signifying that there is sufficient charge in the battery.
3.
Place the headlamp on the head and adjust the fit.
4.
Adjust the focus ring to a suitable size for the task to be carried out.
5.
Make sure the direction of the projected light is in line with the eyes,
and tighten the locking knob.
6.
Place the battery pack in a suitable position.
7. Recharging
If the 'LOW BATTERY' indicator should illuminate, connect the charging
cable. The 'CHARGING' indicator should illuminate. When fully charged
the 'CHARGING' light will go out – the charging cable can be removed.
From a full charge the battery should last about 2-3 hours.
The headlight can be used whilst charging.
Charging cable
Focus ring
Locking knob
Headband
Headband adjuster
Battery pack
Headband covers
Summary of Contents for HL800
Page 1: ...HL800 HEADLIGHT OPERATING MANUAL QAM HL800 1 0608...
Page 2: ...2...
Page 10: ......
Page 11: ......
