GET TO KNOW YOUR TENT
We recommend you check all parts are included
and set up this tent at home before camping use.
THE AIR-VOLUTION
™
DIFFERENCE – INFLATABLE POLES
AT-4 AND AT-6 TENT SET-UP & CARE INSTRUCTIONS
INFLATABLE AIR POLES
Inflatable TPU (thermoplastic polyurethane) Air Poles
are used to replace traditional poles. The Air Poles are
housed in durable sleeves and require minimal pressure
to inflate and provide the necessary structural support.
WARNING: DO NOT OVER-INFLATE AS THIS
MAY CAUSE THE AIR POLES TO RUPTURE AND
CAUSE INJURY.
The Valve Collar
A
, Boston Valve
B
, and Valve Cap
C
.
•
The Boston Valve
B
and Valve Cap
C
can be opened
turning anti-clockwise and closed turning clockwise.
NEVER UNZIP AN AIR POLE SLEEVE WHILST
INFLATED – ENSURE THE BLADDER IS
COMPLETELY DEFLATED PRIOR TO UNZIPPING.
THE AIR PUMP
•
The hand operated pump is high volume, low pressure,
especially designed to inflate all Air-Volution
™
TPU poles.
•
A pressure release valve on the pump will gauge the
amount of pressure required to inflate the Air Poles.
•
Set up the pump by attaching the pressure release valve
B
to the pump
A
then attach the hose
C
to the pressure
release valve
B
.
WARNING: DO NOT USE A COMPRESSOR OR
ANY OTHER PUMP TO INFLATE – ONLY USE
THE INCLUDED PUMP.
AT-6 TENT
CARRY BAG CONTENTS
1
Air-Volution
™
AT-6 Tent with three inflatable TPU
(Thermoplastic Polyurethane) Air Poles
2
Inflatable TPU Ridge Poles
1
Peg bag containing 38 pegs
1
High capacity air pump with hose
1
Pressure release valve
1
Zip on front awning
1
Pole bag containing:
3
Awning poles &
3
Guy ropes
TIP
A
B
C
A
B
C
PUMP WITH A
UP AND DOWN
MOTION.
ZIPPERED
PROTECTIVE
SLEEVE
AT-4 TENT
CARRY BAG CONTENTS
1
Air-Volution
™
AT-4 Tent with two inflatable TPU
(Thermoplastic Polyurethane) Air Poles
1
Inflatable TPU Ridge Poles
1
Peg bag containing 29 pegs
1
High capacity air pump with hose
1
Pressure release valve
1
Zip on front awning
1
Pole bag containing:
3
Awning poles &
3
Guy ropes