9
ATTACHING THE LADDER
1.
Flip the tent base over.
2.
Locate the pre-drilled holes at the
edge of the base and attach the
ladder bracket to the base using
40mm Steel M6 bolt, washers,
and
N
yloc nuts.
DIAGRAM B
For your safety and protection see Diagram C below for correct placement and angle of
ladder. DO NOT CLIMB ON LADDER UNTIL CORRECT ANGLE IS ACHIEVED (approx.
75
degrees between ladder and ground). NOTE: If the angle of the ladder is at 90
degrees and/or does not reach the ground, you will need a ladder extension (not
included). The ladder placed in correct position also acts as a brace for the suspended base of
your
tent.
DIAGRAM C
Summary of Contents for Hi View 1400
Page 13: ......
