2 Safety Instructions
22
OM Hydraulic aggregate, Version 1.0 01/2013
2.8
Safety Instructions for Commissioning
We would like to draw your attention to the fact that the conversion and the
hydraulic installation of the device may only be carried out by trained per-
sonnel and authorised persons with profound mechanical, hydraulic / pneu-
matic and if necessary electric knowledge.
Make sure there are no potential hazards for persons or the environment
when starting up the device.
Make sure people do not linger in or enter the danger zone of the device
or this area in general during start-up.
Take measures that provide warnings before starting up the device.
Before starting up, always check
– that the device is functioning correctly.
– whether the device and all its components are free from contamination,
wear, deformation, damage and corrosion.
– whether all parts and fixtures fit tightly.
– hydraulic hoses and connections for leakage.
Do not put into operation a device whose functional / operational safety is
not ensured / present.
