PVE400 USER’S GUIDE
4.2 IP router
As the PVE400 unit has two network interfaces, it can act as a wireless router. By default IP forwarding is
enabled. All you need is to configure IP settings of the external devices, so that they will be in the same IP
segment as PVE400 Ethernet, and PVE400 will be as the default gateway for them.
Example:
Ext device #1 PVE400 Ethernet side PVE400 Wireless side
IP 192.168.1.2 IP 192.168.1.250 IP 172.31.1.200
MASK 255.255.255.0 MASK 255.255.255.0 MASK 255.255.0.0
GW 192.168.1.250 GW - none GW 172.31.0.20
Test connection using
“ping 172.31.0.20”
In order to access “Ext device #1” from wireless network, make static routing table with gateway 172.31.1.200
as default gateway for 192.168.1.000 segment. Test connection using
“ping 192.168.1.2”
Copyright © 2007-2008 Darim Vision Co, All Rights Reserved
- 23 -
