PVE400 USER’S GUIDE
3.2 Network configuration
3.2.1
Wired connection configuration
The
NETWORK
configuration tab allows to specify all related settings if the device is used with AUX Ethernet
cable.
Figure 6. Ethernet configuration page
The
Internal Ethernet
adapter supports
10
and
100
Mbps speed and
Half
and
Full Duplex
mode.
When the
Ethernet speed
parameter is selected as
Auto
, it will be automatically set accordingly to the
connection.
The
Ethernet IP mode
drop-down list allows you to select the IP configurations parameters:
DHCP Server
- PVE400 has an internal DHCP server and can provide IP address for other devices
connected to PVE400.
If this mode is selected, specify the address range in the
DHCP Server Starting IP Address
and
DHCP Server Ending IP Address
fields.
Set
DHCP
Lease
Time
in seconds.
The
Ethernet IP address
parameter must be assigned manually and should be in the same IP
segment and DHCP range.
Copyright © 2007-2008 Darim Vision Co, All Rights Reserved
- 12 -
