PREPARATION AND INSTALLATION
B-DVR User’s Guide
10
4.2
Installation
4.2.1
Plug in the power cord
Make sure to read the installation instruction in detail before plug in the power cord. Before
connecting B-DVR to other device, plug in the power cord according to the instruction in this
chapter. The power cord protects B-DVR from the electrical damage by ground. Follow
the instruction.
Installation 1.
Make sure the mentioned usable voltage limit of the B-DVR back panel suits the type of
voltage system to be connected. The voltages (220V/50Hz, 220V/60Hz) are suitable for
B-DVR. Confirm again the voltage type to be connected before connecting.
Installation 2.
Connect the end of B-DVR power cord to the socket of the B-DVR back panel.
Installation 3.
Plug in the other end of power cord into the grounded 3-hole receptacle or the multi-hole
outlet.
Note) B-DVR is ground safe and has 3-line grounded plug. Consult to the engineer if you can't
plug the power cord grounded AC receptacle.
[Picture 4.9] Connected power cord to B-DVR
Summary of Contents for B-DVR
