24
•
Only use a lancet authorized by LabStyle Innovation
Ltd. (30G).
•
If the lancet does not set into place or the lancet
holder does not hold the lancet properly, insert
another sterile lancet.
•
If the problem persists, you may need to replace
your Dario Housing. Contact customer support toll-
free in the U.S. at 1-800-895-5921, 9:00 AM-5:00 PM
EST Monday through Friday or visit
www.mydario.com
.
5.
Carefully twist off the lancet cap, as shown in the image below. Ensure
that you do not bend the lancet while removing the cap
.
Setting Lancet Depth (Optional)
You can adjust the puncture depth of the lancet by moving the lever between
the numbers 1 and 4 (printed on the dial). 1 is the shallowest depth and 4 is
the deepest. It is recommended that you start with the lancet depth set to 1
and adjust the level upwards if necessary
.
To set lancet depth
:
1.
Move the lancing device lever so that the line on the lever is aligned with
the correct depth number, as shown in the image below.