9
Note that if the DualShock controller was not successfully connected, the two KEY LOCK
LEDS will flash three times, then return to indicating the KEY LOCK status. Unplug all cables
and repeat the above steps.
7.
Press the HOME button to start the game.
Xbox Consoles
Perform the following steps to connect the Arcade Fighting
Stick to an Xbox One™, Xbox Series S™, or
Xbox Series X™.
1.
Open the STORAGE SPACE cover and pull out the built-in cable.
2.
Position the built-in cable in the CABLE OUTLET on the STORAGE SPACE cover, then close
the cover.
3.
Plug the built-in cable into one of the USB ports on the Xbox® console.
4.
Press and hold the SWITCH/TOUCHPAD BUTTON for 2 seconds to switch to console mode.
The two KEY LOCK LEDS will flash alternately, indicating that the Arcade Fighting Stick is in
console mode and ready to be connected to the Xbox controller.
5.
Plug one end of the included USB Cable into the USB port on the Xbox controller, then plug
the other end into the USB PORT on the Arcade Fighting Stick. The two KEY LOCK LEDS will
