Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
+32(0)50/71.81.38
info@dark.be
www.dark.be
DARK
fax
LED
E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Put the lamholder through the lampshade.
2. Put the other lampshade on the lampholder.
3. Fasten with the ring on the lampsocket.
4. Place the lamp. Respect the wattage.
5. Mount the ceiling bracket with 2 screws onto the ceiling.
6. Adjust the fixture to the preferred height
and fasten the strainrelief.
7. Connect the power supply and close the ceiling base.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
260 mm
340 mm
230 V
IP20
850°C
0.3m
V2 19/08/2016
standard
1500mm
1
2
3
4
5 6
7
5 6
7
101
kg
1
CONNECTION
Standard version
Green/Yellow
Brown (L)
Blue (N)
Green/yellow (ground)
© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on
www.dark.be.
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
+32 50 71 81 40 / info@dark.be /
www.dark.be
ASSEMBLY DOCTOR
ij-lamp
metal
design Jacob de Baan for dark
V—22/08/22
1
Put the lampholder through the lampshade.
2
Put the other lampshade on the lampholder.
* Please use gloves for handling and installation of light fixture. This will reduce
fingerprints and scratches.
3
Fasten with the ring on the lampsocket.
4
Place the lamp. Respect the wattage.
5
Mount the ceiling bracket with 2 screws onto the ceiling.
6
Adjust the fixture to the preferred height and fasten the strainrelief.
7
Connect the power supply and close the ceiling base.
!!! Never connect the fixture on 220-240V ac without driver.
Lighting fixture is constant current driven.
For drivers purchase, contact your sales contact.
Always connect constant current leds in serial connection.
Check catalogue P 488-489 (Installation of LED)
LIGHT SOURCE
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
+32(0)50/71.81.38
info@dark.be
www.dark.be
DARK
fax
LED
E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V
IP20
850°C
0.3m
V0 19/08/2016
kg
1
260
31
1
23
9
1
2
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
+32(0)50/71.81.38
info@dark.be
www.dark.be
DARK
fax
LED
E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V
IP20
850°C
0.3m
V0 19/08/2016
kg
1
260
31
1
23
9
1
2
Alu-Metal-Brass
230 V
IP20
850°
