Design by Constantin Wortmann for DARK
Assembly doctor for SPACEWALKER FLOOR
ATTENTION !!
DO NOT PLACE THE SPACEWALKER BODY ON HIS HEAD !!
V5 16/08/2016
4
1
2
3
4
5
m
0,2
kg
40
IP40
°C
850
G5
Watt
39
Watt
21
T16
230 V
3X
LED
6
1. Insert 3 T5-lamps in the fixture. Respect the wattage of the gear.
2. Fixate the lamp rod in the body with the 3 bolds and washers
(Max. force: 1,5N/m).
3. Place the 2 rubbers between the feet and floor plate.
Fixate with the 4 screws.
4. Screw 1 headless screw in the backpack of the body and a second
one into the floor plate. Mount the pink cable over the screws.
5. Lock the bottom cap between the legs with the cable grommet.
6. Plug in and switch on.
NO DIM
NO DIM
T16
G5
3X
+32(0)50/71.81.40
+32(0)50/71.81.38
info@dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
fax
tel
www.dark.be
DARK
Design by Constantin Wortmann for DARK
Assembly doctor for SPACEWALKER FLOOR
ATTENTION !!
DO NOT PLACE THE SPACEWALKER BODY ON HIS HEAD !!
V5 16/08/2016
4
1
2
3
4
5
m
0,2
kg
40
IP40
°C
850
G5
Watt
39
Watt
21
T16
230 V
3X
LED
6
1. Insert 3 T5-lamps in the fixture. Respect the wattage of the gear.
2. Fixate the lamp rod in the body with the 3 bolds and washers
(Max. force: 1,5N/m).
3. Place the 2 rubbers between the feet and floor plate.
Fixate with the 4 screws.
4. Screw 1 headless screw in the backpack of the body and a second
one into the floor plate. Mount the pink cable over the screws.
5. Lock the bottom cap between the legs with the cable grommet.
6. Plug in and switch on.
NO DIM
NO DIM
T16
G5
3X
+32(0)50/71.81.40
+32(0)50/71.81.38
info@dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
fax
tel
www.dark.be
DARK
© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on
www.dark.be.
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
+32 50 71 81 40 / info@dark.be /
www.dark.be
ASSEMBLY DOCTOR
spacewalker
floor
design Constantin Wortmann for dark
V—22/08/22
1
Insert 3 T5-lamps in the fixture. Respect the wattage of the gear.
2
Fixate the lamp rod in the body with the 3 bolds and washers
(Max. force: 1,5N/m).
3
Place the 2 rubbers between the feet and floor plate.
Fixate with the 4 screws.
4
Screw 1 headless screw in the backpack of the body and a second
one into the floor pate. Mount the pink cable over the screws.
5
Lock the bottom cap between the legs with the cable grommet.
6
Plug in and switch on.
!!! Never connect the fixture on 220-240V ac without driver.
Lighting fixture is constant current driven.
For drivers purchase, contact your sales contact.
Always connect constant current leds in serial connection.
Check catalogue P 488-489 (Installation of LED)
LIGHT SOURCE
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
ATTENTION !!
DO NOT PLACE THE SPACEWALKER BODY ON HIS HEAD !!
PE-Metal
230 V
IP20
850°