1
Base Exposure
The mode key advances the exposure type -
shown in the first display character: ‘d’ for
dodge, ‘b’ for burn, ‘p’ for progressive burn, ‘t’
for test strips, ‘m’ for memory mode. Types
may not appear if a required previous exposure
has not been made or option enabled.
The timer is ready to make the base exposure
when there is a blank character in the left
position.
You can focus at any time by holding the
expose key down for one second. Turn the
enlarger off by tapping the expose key again.
Set the exposure in stops with the raise and
lower keys.
0.0 = 1.00 sec 3.2 = 9.19 sec
1.0 = 2.00 sec 3.3 = 9.85 sec
2.0 = 4.00 sec 4.0 = 16.00 sec
3.0 = 8.00 sec 5.0 = 32.00 sec
3.1 = 8.57 sec 9.9 = 955.43 sec
Start the exposure by tapping the expose key.
The enlarger will turn on and the safelight off,
the display will count down the remaining
seconds.
Pause the exposure by tapping the expose key;
the display will flash. Resume the exposure by
tapping the expose key again.
Cancel the exposure by holding the expose key
down for one second.
