background image

01787 370187  

|

  info@darouv.co.uk  

|

  

darouv.co.uk

Warranty

12-month warranty for Water Disinfection Unit:

Daro UV Systems provides a twelve (12) month 
warranty from the date of purchase for this ultraviolet 
water disinfection unit, provided that it is installed and 
maintained in accordance with the manufacturer’s 
instructions. Faults regarding the material and 
workmanship of this unit will be repaired or replaced 
free of charge.

Warranty Terms

This warranty will become void if the unit(s) are not 
installed and operated according to the instructions 
in the manual. It will not be valid for damage(s) 
which has (have) been caused by misuse, accidents, 
negligence, frost, fire, flood, or acts of God. This 
warranty will not be applicable to parts from which 
the label with the original manufacturing date code 
has been removed or made illegible. This warranty 
will only be valid if approved Daro UV Systems spare 
parts are used. All models are to be operated and 
maintained in accordance with the owner’s operating 
instructions. This warranty will become void if the 
ultraviolet system is removed from its original place 
of installation, or if the operating pressure exceeds 
10 bar, or if the temperature of the fed water exceeds  
25 °C or falls below freezing point. 

 
 
All faulty parts must be returned to Daro UV Systems 
for inspection and repair or replacement. Daro UV 
Systems will check and test the faulty parts and 
identify the reason for the defect. Faulty parts will 
be replaced free of charge. Daro UV Systems will 
not be liable for any labour costs but only for repairs 
which have been carried out according to the works 
standards. Collateral or consequential damage(s) 
will not be covered by this warranty. All complaints 
should be notified in writing to Daro UV Systems 
within thirty (30) days from identifying any damage. 
The receipt of the plant must be presented to ensure 
the validity of this warranty.

Saphir Range

11

Summary of Contents for Saphir Series

























Reviews: