After pressing the (,) - key (Decimal point key) appears at this point
the numbers 0 and 1 on top of each other to indicate the entered
Decimal place.
If a function key is pressed, the value automatically moves to the
appropriate position.
Example : 71,5 X 22,123 = 1 581,795
Decimal point position 3
Enter
71,5 X 71,500
Enter
22,123 = 1531,795
Example : 4,73 : 2,4 = 1,97
Decimal point position 2
Enter
4,73 : 4,73
Enter
2,4 = 1,97
Example : 720,1 : 11,23 = 64,122 9
Decimal point position 4
Enter
720,1 : 720,1000
Enter
11,23 = 64,1229
In the last example, the number of decimal places to set depends on the
result, which is desired with 4 decimal places.
After the decimal place zeros are filled up automatically.
The decimal position must be maintained during the computation process,
you may be added values in the memory or be returned from the memory.
The results (products and Quotient) are automatically rounded in the last
place, IE. from paragraph 5 is rounded up.
The decimal position must be maintained during the computation process,
you may have added values to the memory or be returned from the memories.
Example :
Decimal point position 6
1,000000 : 6,000000 = 0,166667
Decimal point position 3
2,58 X 3,01 = 7,766 (7,7658
≈
7.766)
4.8. Constant factors
During multiplication, the exponentiation (Xn key) can be used for the
calculation with a constant factor.
By pressing the (X) key, the multiplicand is adopted as a constant
factor. After entering the variable multiplier, press the (Xn) key. The
respective product is displayed (see also calculation example 6):
4.9. Correction
If you have not yet pressed any function keys, you can delete an entry by
pressing the (C) key. If a function key is pressed after entering the
digits, the correction is made by pressing the (Delete) key. The bill is
to be repeated.
12
