24
IV. Clip (Caller ID)- Calling line identification presentation
LJ-120
IV. Clip (Caller ID)- calling line identification
presentation
Note!
CLIP
function is only available if you have subscribed to the
relevant TP S.A. services or those of another Provider. If
more information is required, please contact the BOK (Customer
Service Office) office in your area..
Your telephone displays and stores the number of the caller. The number is
displayed until the
UP/+
or
DOWN/-
button is pressed or the handset lifted.
The number can be identified using the
FSK/DTMF
system
In Poland, the FSK system is obligatory.
The FSK system is the best to use, because:
it allows the sending of statements, which define the status of the
number,
it allows the automatic setting of time and date.
Note!
The volume of the CLIP memory locations depends on the volume of
the digits in the telephone number. If the stored numbers have
16 digits, the OUT memory has 110 memory locations. If the
volume of the digits decreases, the volume of the memory
locations increases. For example, for 10-digit numbers, the
volume of the memory location is 130, for 8-digit numbers the
volume of the memory location is 160.
Together with the number, date, time and statements (symbols) are also
stored. The display can show the following symbols:
NEW
- a new number is stored in the memory,
REP
- the number is repeated,
- - P - -
- the number is private and cannot be displayed,
- - O - -
- the number is unknown and cannot be shown,
Error (- - - E- - - )
- an error has occurred in sending the number.
The number is identified and stored in the following form:
for example
- 0 42 1234567,
The identified number consists of:
0
- prefix,
42
- local area code,
1234567
- number of subscriber.
Note!
If the clip memory is full, storing a new number automatically
deletes the first stored number.
