Keep in mind that when a standard 2x4 or 2x3 or 4x2 crossover is set up, the channels are automatically
linked.
For instance, in a 2x4 configuration, channels 1 and 5 are linked, as well as channels 2&5, 3&6 and 4&8.
In the Routing screen, the user can select the input channels that are going to “feed” each output. In the
image above, channels 1 to 4 use input A, and channels 5 to 8 use input B.
For each of the outputs, the user can edit the level, delay, phase (polarity) and channel name.
On the left side are shown the 4 possible inputs with the same parameters to be adjusted, level, delay,
phase (polarity) and name.
There are different “pages” to access to all the parameters in the processor:
Routing, Limiters, EQ, DEQ, GEQ, Presets, System, Monitor.
linked channels
15
E11EVEN SOUND \ IO-48 \ User’s Manual
Summary of Contents for E11EVEN 11SOUND
Page 29: ...www 11sound com ...