23
The tables shown on the previous page are displayed here in graph format:
The attack and
release times are
set automatically
depending on
the high pass
filter
If the “Auto” option is not engaged these are the recommended attack time values depending on the
frequency of the High Pass Filter or the frequency range:
When the “Auto” selection is NOT engaged the user can set as well, the Clip Threshold,
which is above the limiter threshold. Typically between 3 to 4dB more with respect to
the threshold value.
30Hz-60Hz
32Hz-85Hz
70Hz-200Hz
125Hz-250Hz
250Hz-500Hz
500Hz-1000Hz
1000Hz-2000Hz
2000Hz-20000Hz
45ms
32ms
5.7ms
4ms
2ms
1ms
0.5ms
0.3ms
E11EVEN SOUND \ IO-48 \ User’s Manual
The limiter on each output has an adjustable attack time and threshold, with a release time that is selectable to
be a multiplier of the attack time. For example, the attack time is 2ms, then realese time is x16 = 32ms.
The attack and release times can be automatically linked to the high pass filter frequency of the output, so that
they are set to correct values for the output´s frequency range. If this feature is enabled, the software will show
in orange “Auto”:
Summary of Contents for E11EVEN 11SOUND
Page 29: ...www 11sound com ...