43
INTEGRAL-M88 Manual
INTEGRAL
ALMA control
In addition to the MIXER, INPUT, OUTPUT and SOURCE options, you
can access the Limiters tab and the Output Settings tab, where you
can select the following configuration options: priority, bridge mode
and DANTE outputs.
In the Limiters tab, the user can configure the threshold value for
each output channel and the attack and release times, in the case of
not using the automatic mode of the limiters. When using the auto-
matic mode, the attack and release times are automatically config-
ured according to the high cutoff frequency of that section or chan-
nel.
In the Settings tab, the first configuration option is Priority. Up to two
priority levels are available for each output channel. The priority in-
puts can be any of the following: IN A, IN B, IN E, IN F.
Attack, Release, Threshold and Depth times are the parameters
available for the priority channels.
For every output channel, you can select up to two priority sourc-
es or input channels. In the following example, for Output 1, Input
B has been assigned as level 1 priority channel ( a letter P will ap-
pear indicating that there is a Priority input on that channel):
Summary of Contents for INTEGRAL Series
Page 1: ...INTEGRAL M88 Users manual www dasaudio com ...
Page 45: ......
