21
Manual del Usuario
/ UX series /
User’s Manual
KIT-R-UX218
AX-UX218
PICKUP-AX-AE40S3
Click
Click
RIGGING
Out of the subwoofers in this manual, only
UX-218A-R
can use a frame designed specifically for flying.
UX-218A
can be converted to
UX-218A-R
by means of the
KIT-R-UX218
accessory kit. Only in this way will the
enclosure be safely suspended.
Note: when handling heavy loads, always wear appropriate clothing and protective elements
such as gloves, safety shoes, etc.
Therefore, only
UX-218A-R
can combine with the
AX-UX218
accessory frame so that enclosures can be
flown safely. If an extra pick-up point was needed, a
PICKUP-AX-AE40S3
center bar could be added. This is
shared with
AERO-40A
systems, so that
PICKUP-AX-AE40S3
allows for easy combining with these line array
systems.
These accessories can be seen in the figures below.
Next, we'll show an example of a line array system, with the steps on how to assemble it.
The attachment point system is similar to that of the
AERO-40A
, so, if unfamiliar with it, we suggest you go
through the rigging manual for these systems
(RM_AE40_03)
.
Looking at the enclosure from the side, it can be seen that the frame is symmetrical to optimise a cardioid
arrangement.
Acting on the side controls, the attachment parts will release. We'll know that they are locked into place
once we hear a click, like the front attachment points on
AERO-40A
, while the side controls will automatically
go back to the initial position when released.
Side controls
