7
When the message below appears on the screen of your LCD codepad, it is an
indication that the telephone line that your security system depends on for
reporting alarms is not functioning, and therefore cannot report alarms to the
monitoring station.
PHONE TROUBLE
When the message below appears on the screen of your LCD codepad, it is an
indication that an alarm has previously occurred. Press the
[A]
button to review
the zone(s) that created the previous alarm. Press [#] to exit.
PREVIOUS ALARM
TYPE A FOR HELP
When the message below appears on the screen of your LCD codepad, it is an
indication that the digital dialer in the control panel attempted to communicate to
the Central Monitoring Station but was unsuccessful in the connection attempt.
FAILURE TO
COMMUNICATE
When the message below appears on the screen of your LCD codepad, it is an
indication that the A.C. power source that your security system depends on has
been turned off. Under this condition the POWER LED will extinguish.
AC POWER FAILURE
When the message below appears on the screen of your LCD codepad, it is an
indication that your systems' backup battery has insufficient power to backup your
system. Under this condition, the POWER LED will flash.
LOW BATTERY
If your security system has any wireless points (sensors) of protection, and the
