UMN:CLI
User Manual
V5824G
478
To delete the configured parameters for the head-end node on the connection, use the
following command.
Command
Mode
Description
no onu rf-pw dst-mac
GPON
Deletes the configured destination MAC address,
ethernet type or VLAN ID for the head-end node
connection.
no onu rf-pw ethtype
no onu rf-pw vid
This feature is available for Dasan Networks
’ RF return modulator (V5800) only. The
V5824G is not provide compatibility with other RF return modulators.
To display the configured parameters for the head-end node, use the following command.
Command
Mode
Description
show onu rf-pw
GPON
GPON-OLT
Shows the configured parameters for the head-end
node to send the RF return path traffic.
11.1.14
Downstream Traffic Control
The V5824G provides the function to control the downstream traffic based on MAC
address and VLAN ID by each OLT. Basically, the OLT system creates MAC table through
MAC learning with the incoming traffic from ONU, and transmits the downstream traffic to
GEM port with the MAC table information. However, V5824G can control this downstream
traffic with MAC address and VLAN ID by user configuration.
To configure the downstream traffic control, use the following command.
Command
Mode
Description
olt ds-gem-mapping
{
mac
|
mac-
vid
|
vid
|
per-flow
[
key-mac
|
key-
mac-vid
]}
GPON-OLT
Configures the GEM port mapping mode.
mac, mac-vid: GEM port mapping with destination
MAC address or destination MAC address and VLAN
ID
vid: GEM port mapping with VLAN ID
(default: mac)
onu vlan-gem-mapping
ONU-ID
vid
RANGE
mapper
MAPPER-ID
Maps GEM port of ONU and VLAN ID.
(This configuration is valid only when the GEM port
mapping mode is specified as
‘vid’ and the GEM port is
assigned through ONU profile configuration.)
ONU-ID: ONU ID or serial number
RANGE: VLAN ID range (This value should be unique
by each OLT port.)
MAPPER-ID: mapper number configured on Traffic
Profile
onu vlan-gem-mapping all vid
RANGE
{
multicast-gem
|
broadcast-gem
}
Maps the multicast or broadcast GEM port used by all
ONUs and the specified VLAN ID.
RANGE: VLAN ID range
i
