UMN:CLI
User Manual
V5824G
492
For the details of how to create and configure the IP host service, see
. The IP assignment on IP host service configuration has to be
specified as
“
static
” when assigning IP address to ONU.
To display the configured IP host service ID on ONU, use the following command.
Command
Mode
Description
show onu ip-host
ONU-ID
GPON-OLT
Shows the configured IP host service ID on ONU.
11.2.3
Activating Administration for UNI
To enable/disable the administration of the ONU (ONT) UNI port, use the following
command.
Command
Mode
Description
onu port-admin
ONU-IDs
uni
{
eth
|
pots
|
ces
|
virtual-eth
|
video
|
wifi
}
UNI-PORTs
{
enable
|
disable
}
GPON-OLT
Enables/disables the administration of UNI port on the
specified ONU.
ONU-ID: ONU ID (1 to 128) or ONU serial number
eth/pots/ces/virtual-eth/Video: Ethernet / POTS / CES /
virtual Ethernet/Video/Wi-Fi
UNI-PORT: UNI port number
To see the admin status of the ONU (ONT) UNI, use
show onu uni-status
command.
11.2.20 Displaying ONU Information
11.2.4
Forward Error Correction (FEC) Mode
To enable/disable FEC mode for ONU ID, use the following command.
Command
Mode
Description
onu
us-fec-mode
ONU-IDs
enable
GPON-OLT
Enables upstream FEC mode for ONU ID.
onu
us-fec-mode
ONU-IDs
disable
Disables upstream FEC mode for ONU ID.
If you want to enable the upstream FEC mode for ONU, you should enable upstream
FEC mode for OLT first. For the detail of how to enable the upstream FEC mode for OLT,
see
11.1.7 Forward Error Correction (FEC) Mode
i
i
