UMN:CLI
User Manual
V5824G
540
NetBEUI
03.00.00.00.00.01
–
AppleTalk
FF.FF.FF.FF.FF.FF
0x809B, 0x80F3
09.00.07.00.00.00
– 09.00.07.00.00.FC,
09.00.07.FF.FF.FF
–
Bridge
management
information
01.80.C2.00.00.00
– 01.80.C2.00.00.FF
–
ARP
FF.FF.FF.FF.FF.FF
0x0806
PPPoE broadcast
FF.FF.FF.FF.FF.FF
0x8863
Tab. 11.2
Protocol Types for MAC Filtering
11.4.3.5
UNI Port Configuration
A UNI-side port is an ONU device port connected to a subscriber. To enable/disable a
connection between a MAC bridge service profile and UNI-side port for the downstream
traffic, use the following command.
Command
Mode
Description
uni
{
eth
|
virtual-eth
}
UNI-PORT
Traffic
Bridge
Connects an UNI port of ONT to a specified MAC
bridge service profile.
UNI-PORT: UNI port number
no uni
{
eth
|
virtual-eth
}
UNI-
PORT
Removes the UNI port of ONT from the MAC bridge
service profile.
VLAN Tagging Filtering
To enable/disable VLAN tagging filtering function on the UNI-side port, use the following
command.
Command
Mode
Description
vlan-filter
[
vid
<1-4094>]
untagged
{
allow
|
discard
}
Traffic
Bridge-UNI
Enables a VLAN tagging filtering function of UNI-side
port.
allow: forwards the untagged frames to UNI-side port
discard: blocks the untagged frames to UNI-side port
1-4094: VLAN ID(s)
vlan-filter vid
{
add
|
del
}
VID
Adds or deletes the VLAN ID on the VLAN list
configured by
vlan-filter vid
command above.
VLAN Tagging Operating
To configure a VLAN tagging operation, use the following command.
Command
Mode
Description
vlan-operation us-oper keep
Traffic
Bridge-UNI
Sets the policy of VLAN tagging for upstream frame.
keep: keeps forwarding the existing tagged/untagged
frame
vlan-operation us-oper
{
add
|
overwrite
}
<1-4094> <0-7>
Sets the policy of VLAN tagging for upstream frame.
add: adds a specified VID (double tagging) with tag in
