UMN:CLI
User Manual
V5824G
546
To delete the T-CONT ID, use the following command.
Command
Mode
Description
no tcont
TCONT_ID
Traffic-
Profile
Deletes the configured T-CONT ID.
11.4.4.1
GEM Port Configuration
To specify the GEM ports (priority queue) per T-CONT by mapping between T-CONT and
GEM port, use the following command.
Command
Mode
Description
gemport
GEM-PORTS
[
queue
<0-7>]
Traffic-
TCONT
Specifies the priority queues of a GEM port.
GEM-PORTS: mapper ID/GEM port ID
(ex: 1/1= mapper #1:gem port 1, 1/2= mapper#1:gem
port 2, 2/1-4=mapper #2:all gem ports)
no gemport
GEM-PORTS
Deletes the configured mapping between T-CONT and
the list of GEM ports.
11.4.4.2
Configuration of Weight on WRR Scheduling
To specify the weight value to queue number on WRR scheduling mode, use the following
command.
Command
Mode
Description
queue
<1-8>
weight
<1-255>
Traffic-
TCONT
Specifies the weight value to queue number on WRR
scheduling mode.
1-8: queue number (a lower number indicates a higher
priority.)
1-255: weight value
11.4.4.3
DBA Profile Association
You can associate a configured DBA profile with T-CONT by using the following command.
Command
Mode
Description
dba-profile
NAME
Traffic-
TCONT
Associates a configured DBA profile with T-CONT.
NAME: DBA profile name
For the details of how to create and configure a DBA profile, see
i
