User Manual
UMN:CLI
V5824G
557
UDP/TOS Configuration
To perform the configuration for protocol type-based service that is offered from an IP
host, use the following command.
Command
Mode
Description
udp port
PORT
tos
TOS
Traffic
CES-PW-IP
Specifies
the
port
number
that
offers
the
UDP/TCP/TLSP/protocol type service and the value of
the TOS field of the IPv4 header.
PORT: port number
TOS: type of service per IETF RFC 1349 or a
differentiated services code point (DSCP) defined by
IANA (default: 0)
protocol
{
udp
|
tcp
|
tlsp
|
TYPE
}
port
PORT
tos
TOS
11.4.7.8
Displaying TDM Pseudowire Information
To display the information of TDM pseudowire profiles, use the following command.
Command
Mode
Description
show tdm-pw-profile
[
NAME
]
Global
GPON
GPON-OLT
TDM-PW-
Profile
Shows the information of TDM pseudowire profiles.
NAME: TDM pseudowire profile name
To display the list information of source MAC addresses for TDM pseudowire of ONU, use
the following command.
Command
Mode
Description
show onu tdm-pw source-mac
ONU-ID
GPON-OLT
Shows the list of source MAC addresses for TDM
pseudowire of the specified ONU.
11.4.8
Management Mode
The OLT manages the ONU through an ONU management and control interface (OMCI)
path. An OMCI is a configuration transmission path defined in the GPON standard. If the
OLT manages the ONU through a non-OMCI path, this ONU
’s UNI port is connected as a
Virtual Eth and is controlled by its web/TR-69/SNMP management system.
To specify the management mode of ONU
’s UNI port, use the following command.
Command
Mode
Description
mgmt-mode uni
{
eth
|
pots
|
ces
|
video
}
UNI_PORT
{
omci
|
non-
omci link virtual-eth
NUMBER
}
Traffic-
Profile
Specifies the management mode of ONU
’s UNI port
using OMCI or non-OMCI path.
UNI_PORT: UNI port number (1-32)
no mgmt-mode uni
{
eth
|
pots
|
ces
|
video
}
UNI_PORT
Deletes the specified UNI port
’s management mode.
