User Manual
UMN:CLI
V5824G
563
If there are a
“non-assured” T-CONT and “best-effort” T-CONT, the “non-assured” T-
CONT takes precedence over the other one to be allocated the remained bandwidth by
OLT.
To delete the configured bandwidth allocation policy of DBA profile, use the following
command.
Command
Mode
Description
no sla
{
fixed
|
assured
|
maximum
}
DBA-Profile
Deletes the configured bandwidth allocation policy.
11.5.3
Saving DBA Profile
After configuring a DBA profile, you need to save the profile using the following command.
Command
Mode
Description
apply
DBA-Profile
Saves a DBA profile configuration.
Whenever you modify a DBA profile, you should apply the changes again using the
apply
command. If you do not, it will not be saved with new changes.
You can apply the flexible bandwidth allocation per T-CONT according to the priority of
traffic. After saving the DBA profile and creating T-CONT profile, you should apply the
DBA profile on a specified GEM port of T-CONT profile to specify the bandwidth of GEM
port by mapping between T-CONT and DBA profile.
11.5.4
Displaying DBA Profile
To display DBA profile information, use the following command.
Command
Mode
Description
show dba-profile
[
NAME
]
GPON
GPON-OLT
DBA-profile
Traffic-TCONT
Shows the information of DBA profiles.
i
i
i
