User Manual
UMN:CLI
V5824G
571
11.7
VoIP Profile
11.7.1
OMCI Management Configuration
The GPON system enables multi-vendor interoperability between OLT and ONT. The
OMCI specification addresses the ONT configuration management, fault management
and performance management for GPON system operation and for several services
including voice services. The OMCI and the configuration server based architecture are
the standard alternatives to convey the operation of the ONT for VoIP. In addition, the
VoIP user agent at the ONT needs to work in conjunction with a softswitch for voice
service features.
You need to open
VoIP Profile Configuration
mode to configure VoIP based on OMCI
management. To implement the configurations of VoIP between OLT and ONU, an ONU
profile should be included by the configured VoIP profile. You can easily manage the VoIP
network parameters of ONUs using the VoIP profile.
The ONT must be applied by VoIP profile defined in V5824G if the ONT has POTS
terminations and if OLT is to be used to remotely manage and provide the VoIP service.
11.7.1.1
Creating VoIP Profile
To create a VoIP profile, use the following command.
Command
Mode
Description
voip-profile
NAME
create
GPON
Creates a VoIP profile.
NAME: VoIP profile name
After opening
VoIP Profile Configuration
mode, the prompt changes from
SWITCH(gpon)# to SWITCH(config-voip-profile[
NAME
])#.
To delete an existing VoIP profile, use the following command.
Command
Mode
Description
no voip-profile
NAME
GPON
Deletes n VoIP profile.
NAME: VoIP profile name
To modify an existing VoIP profile, use the following command.
Command
Mode
Description
voip-profile
NAME
modify
GPON
Modifies the exisitng VoIP profile.
NAME: VoIP profile name
i
