UMN:CLI
User Manual
V5824G
60
4.2
System Authentication
For the enhanced system security, the V5824G provides two authentication methods to
access the switch such as Remote Authentication Dial-In User Service (RADIUS) and
Terminal Access Controller Access Control System Plus ().
4.2.1
Authentication Method
To set the system authentication method, use the following command.
Command
Mode
Description
login
{
local
|
remote
} {
radius
|
tacacs
|
host
|
all
} {
enable
|
disable
}
Global
Sets a system authentication method.
local: console access
remote: telnet/SSH access
radius: RADIUS authentication
tacacs: authentication
host: nominal system authentication (default)
all: all types of the authentication
no login
{
local
|
remote
} {
radius
|
tacacs
|
host
|
all
}
Deletes a configured system authentication method.
no login
4.2.2
Authentication Interface
If more than 2 interfaces exist in the V5824G, you can set one interface to access RA-
DIUS or TACACS server.
To set an authentication interface, use the following command.
Command
Mode
Description
login
{
radius
|
tacacs
}
interface
INTERFACE
[
A.B.C.D
]
Global
Sets an authentication interface.
radius: RADIUS authentication
tacacs: authentication
INTERFACE: interface name
A.B.C.D: source IP address (optional)
no
login
{
radius
|
tacacs
}
interface
Deletes a specified authentication interface.
