UMN:CLI
User Manual
V5824G
612
11.14
GPON Debug
To enable debugging of all GPON or a specific feature of GPON, use the following
command.
Command
Mode
Description
debug gpon
{
all
|
func
|
db
|
comm
|
ugrd
|
profile
|
queue
|
statistics
|
rauth
}
GPON
Enables GPON debugging.
all: all GPON features
func: GPON function
db: GPON database
comm.: GPON communication
ugrd: GPON auto-upgrade
profile: GPON profile
queue: GPON queue
statistics: GPON statistics
rauth: GPON radius-authentication
no debug gpon
{
all
|
func
|
db
|
comm
|
ugrd
|
profile
|
queue
|
statistics
|
rauth
}
Disables GPON debugging.
To enable debugging of OMCI message between OLT and ONT, use the following
command.
Command
Mode
Description
debug gpon omci
{
console
|
syslog
}
GPON
Enables GPON OMCI debugging.
console: log output to console
syslog: log output to syslog
no debug gpon omci
Disables GPON OMCI debugging.
To display the debugging status of GPON, use the following command.
Command
Mode
Description
show debug gpon
GPON
Shows the debugging status of GPON.
11.15
Sample Configuration
Configuration Example 1
SWITCH(config)#
gpon
SWITCH(gpon)#
voip-profile
voip
create
SWITCH(config-voip-profile[voip])#
codec-nego 1 codec
pcma
packet-period
10
silence-suppression
1
SWITCH(config-voip-profile[voip])#
codec-nego 2 codec
pcmu
packet-period
10
silence-suppression
1
