UMN:CLI
User Manual
V5824G
90
6 System Environment
6.1
Environment Configuration
You can configure a system environment of the V5824G with the following items:
•
•
•
•
•
Simple Network Time Protocol (SNTP)
•
•
•
•
•
•
•
•
•
6.1.1
Host Name
Host name displayed on prompt is necessary to distinguish each device connected to
network. To set a new host name, use the following command.
Command
Mode
Description
hostname
NAME
Global
Creates a host name of the switch, enter the name.
no hostname
[
NAME
]
Deletes a configured host name, enter the name.
The following is an example of changing host name to
TEST
.
SWITCH(config)#
hostname
TEST
TEST(config)#
6.1.2
Time and Date
To set system time and date, use the following command.
Command
Mode
Description
clock
DATETIME
Enable
Sets system time and date.
show clock
Enable
Global
Bridge
Shows system time and date.
The V5824G can be configured to observe the daylight saving time in specified area. It
means that whenever the system time is updated using a time server located in a
