UMN:CLI
User Manual
V8102
198
To enable/disable MEPs for sending LCK frames to its peer MEP ID, use the following
command.
Command
Mode
Description
ethernet oam lck transmit ena-
ble meg NAME
[
mepid
<1-8191>]
Global
Enables MEPs for sending LCK frames.
NAME: MEG
’s name
ethernet oam lck transmit disa-
ble meg NAME
[
mepid
<1-8191>]
Disables LCK frame transmission of MEPs
To enable/disable MEPs with LCK frames, use the following command.
Command
Mode
Description
ethernet oam lck unicast enable
meg NAME mepid
<1-8191>
rmac MACADDR
Global
Transmits the frames with unicast ETH-LCK infor-
mation to a specified remote MEP.
ethernet oam lck unicast disable
meg NAME mepid
<1-8191>
[
rmac MACADDR
]
Disables the transmission of frames with unicast ETH-
LCK information. .
7.7.12.2
ETH-LCK Client MEG Level
To specify the level of LCK frames, use the following command.
Command
Mode
Description
ethernet oam lck meg NAME
level
<1-7>
Global
Specifies a LCK frame
’s level.
1-7: LCK frame
’s level (default: 7)
no ethernet oam lck meg NAME
level
Deletes a configured LCK frame
’s level and returns to
the default setting.
7.7.12.3
Configuring LCK Frames
To determine an LCK transmission period, use the following command.
Command
Mode
Description
ethernet oam lck meg NAME interval
{
one-
second
|
one-minute
}
Global
Determines transmission periodicity of
frames with ETH-LCK information. (de-
fault: one-second)
no ethernet oam lck meg NAME interval
Deletes a configured transmission period.
To specify the priority of frames with ETH-LCK information, use the following command.
Command
Mode
Description
ethernet oam lck meg NAME
priority
<0-7>
Global
Specifies a priority of LCK frames.
<0-7>: priority of frames (default: 7)
no ethernet oam lck meg NAME
priority
Deletes a specified priority and returns to the default
setting.