UMN:CLI
User Manual
V8102
294
no login radius retransmit
Deletes a specified frequency count.
8.3.6
Server
8.3.6.1
Server for System Authentication
To add/delete the server for system authentication, use the following command.
Command
Mode
Description
login
tacacs
server
A.B.C.D
KEY
Global
Adds a server with its information.
A.B.C.D: IP address
KEY: authentication key value
no login
tacacs
server
[
A.B.C.D
]
Deletes an added server.
A.B.C.D: IP address
You can add up to 5 servers.
8.3.6.2
Server Priority
To specify the priority of a registered server, use the following command.
Command
Mode
Description
login tacacs server move
A.B.C.D
<1-5>
Global
Specifies the priority of server.
A.B.C.D: IP address
1-5: priority of TACACS server
8.3.6.3
Timeout of Authentication Request
After the authentication request, the V8102 waits for the response from the
server for specified time. To specify a timeout value, use the following command.
Command
Mode
Description
login
tacacs
timeout
<1-100>
Global
Specifies a timeout value.
1-100: timeout value for the response (default: 5)
no login tacacs
timeout
Deletes a specified timeout value.
8.3.6.4
Additional Configuration
The V8102 provides several additional options to configure the system authentication via
server.
i
