User Manual
UMN:CLI
V8102
299
rsa: SSH ver. 2 authentication
dsa: SSH ver. 2 authentication
FILENAME: key file name
copy
{
scp
|
sftp
}
key
upload
FILENAME
Enable
Copies the authentication-key file.
copy
{
scp
|
sftp
}
key
download
To configure authentication key and connect to SSH server with the authentication key,
perform the following procedure:
Step 1
Configure the authentication key in the switch.
SWITCH_A(config)#
ssh keygen dsa
Generating public/private dsa key pair.
Enter file in which to save the key (/etc/.ssh/id_dsa):
Enter passphrase (empty for no passphrase):
networks
Enter same passphrase again:
networks
Your identification has been saved in /etc/.ssh/id_dsa.
Your public key has been saved in /etc/.ssh/id_dsa.pub.
The key fingerprint is:
d9:26:8e:3d:fa:06:31:95:f8:fe:f6:59:24:42:47:7e root@V8102
SWITCH_A(config)#
Step 2
Copy the generated authentication key to SSH server.
Step 3
Connect to SSH server with the authentication key.
SWITCH_A(config)#
ssh login
172.16.209.10
Enter passphrase for key '/etc/.ssh/id_dsa':
networks
SWITCH_B#
To display the configured authentication keys in the V8102, use the following command.
Command
Mode
Description
show key-list
Enable
Global
Shows an authentication key of SSH server.