UMN:CLI
User Manual
V8102
468
multicast
|
dlf
}
level
LEVEL
[XE/GE/GPON]
respectively in a port with a user defined rate.
level: threshold level
LEVEL: Rate (unit: Packet/s), range: FE(0-262142),
GE(0-2097150)
no storm-control
{
broadcast
|
multicast
|
dlf
}
Disables broadcast, multicast or DLF storm control
respectively.
By default, DLF storm control is enabled and multicast storm control is disabled.
To display a configuration of the storm control, use the following command.
Command
Mode
Description
show storm-control
[
interface
{
gigabitethernet
|
tengiga-
bitethernet
|
gpon
}
IFPORT
]
Enable
Global
Interface
[XE/GE/GPON]
Displays a configuration of the storm
control.
9.14
Jumbo Frame Capacity
The packet range that can be capable to accept is from 64 bytes to 1518 bytes. Therefore,
packets not between these ranges will not be taken. However, the V8102 can accept
jumbo frame larger than 1518 bytes through user
’s configuration.
To enable/disable the jumbo frame capacity, use the following command.
Command
Mode
Description
jumbo-frame
<1518-12288>
Interface
[XE/GE/GPON]
Configures to accept jumbo frame between
specified ranges. (default: 1518)
no jumbo-frame
Disables configuration to accept jumbo frame
on specified port.
To display the configuration of jumbo frame, use the following command.
Command
Mode
Description
show jumbo-frame
Enable
Global
Interface
[XE/GE/GPON]
Shows a configuration of jumbo frame.
i