UMN:CLI
User Manual
V8102
678
To configure the limiting Number of Database, use the following command.
Command
Mode
Description
max-concurrent-dd
<1-65535>
Router
Configures the limiting Number of Database.
To delete the configuration, use the following command.
Command
Mode
Description
no max-concurrent-dd
<1-65535>
Router
Deletes the configuration.
12.2.19.6
Maximum Process of LSA
The V8102 can configure maximum number of LSA to process. LSA is classified as inter-
nal route LSA and external route LSA, maximum number of LSA can configure on each
class.
And also, if the process of LSA is over the configured number, you can configure it to stop
the process or send the caution message. When the outer route of LSA is overflowed the
assigned value, you can configure it to restart OSPF after the waiting time. If the waiting
time is 0, OSPF keeps the process before the administrator reboots the system.
To assign the maximum number of LSA to process in OSPF, use the following command.
Command
Mode
Description
overflow database
<1-4294967294> [
hard
|
soft
]
Router
Assigns the number of LSA for internal route.
overflow database external
<0-2147483647> <0-65535>
Assigns the number of LSA for external route.
When there is an overflow,
hard
configuration will stop the process, and
soft
configura-
tion will send a caution message.
To release the configuration, use the following command.
Command
Mode
Description
no overflow database
Router
Releases the configuration for OSPF internal route.
no overflow database external
[<0-2147483647>]
Releases the configuration for OSPF external route.
no overflow database external
<0-2147483647> [<0-65535>]
