User Manual
UMN:CLI
V8102
711
[<1-65535>]
12.4.15
UDP Buffer Size of RIP
RIP protocol exchanges the routing information between routers using UDP packets. The
V8102 can be configured theses UDP packets buffer size, use the following command.
Command
Mode
Description
recv-buffer size
<8196-
2147483647>
Router
Sets the UDP Buffer size value for using RIP.
8196-2147483647: UDP buffer size value
no recv-buffer size
<8196-
2147483647>
Restore the default value of UDP buffer size.
12.4.16
RIP Routing Metric Update as Cisco
To enable or disable the RIP routing metric update to conform to Cisco's implementation.
Command
Mode
Description
cisco-metric-behavior enable
Router
Enables metric updation behavior as Cisco
cisco-metric-behavior disable
Disables metric updation behavior as Cisco
12.4.17
Monitoring and Managing RIP
You can display specific router information such as the contents of IP routing tables, and
databases. Information provided can be used to determine resource utilization and solve
network problems. You can also discover the routing path your router’s packets are taking
through the network.
12.4.17.1
Displaying RIP Protocol Information
To display RIP information, use the following command.
Command
Mode
Description
show ip rip
database
Enable
Global
Shows RIP information being used in router.
show ip route
[
database
]
rip
Shows a routing table information involved in RIP.
show ip protocols
[
rip
]
Shows a current status of RIP protocol and its infor-
mation.
show ip rip interface
{
channel
group
|
gpon
|
tengigabitether-
net
}
IFPORT
Enable
Shows RIP information of specified interface.
IFPORT: interface port number
show ip rip interface vlan
VLANID
To clear RIP information being used in router, use the following command.
Command
Mode
Description
